Colour?
Soundshuttle is available in four standard colours;
blue, yellow, beige or black
Where corporate identity is a consideration,
Soundshuttle can be produced in your corporate colours,
with full colour logos or slogans if required.
All units feature the distinctive logo,
which makes them instantly recognisable.
Optional Features (special order)
External Microphone
Sometimes referred to as a boundary microphone: an external
microphone plugs directly into Soundshuttle allowing
multiple users with hearing difficulties to communicate
freely. A particularly useful feature for small workgroups,
social gatherings or small training rooms.
External Loop
Soundshuttle has its own internal loop for effective
communication over a precisely controlled range. However,
where a greater range is required, for example in a meeting
room, Soundshuttle can be specified with an external loop.
Soundshuttle Specifications
Optional Features
Soundshuttle can be specified with 3.5mm mono jack sockets for optional connection of an
external electret microphone and an external loop. Power for the external microphone is provided
by the unit. Any external loop must present an impedance of greater than 3 ohms (50Hz to 20kHz).
Safety
Soundshuttle and its associated power supply / charger are designed for indoor use only. They
contain no user-serviceable parts. DO NOT REMOVE THE OUTER COVERS. Since the unit
contains a nickel metal hydride battery pack, it must be disposed of in an approved manner.
Contact your local authorities for further information.
Set-up & Operation
There are no adjustments necessary by the user. The unit comes pre-set from the factory.
Simply unpack, place in a suitable location between the assistant and the customer, turn on and
talk normally. Soundshuttle can be positioned either horizontally (e.g. flat on a desk or counter)
or vertically with the microphone facing towards the operator (the microphone is located near
the centre of the rear face).
Batteries and Recharging (not applicable to mains unit)
To recharge the internal battery, simply connect the unit to the mains supply via the charger.
ONLY THE APPROVED CHARGER SUPPLIED MUST BE USED. The unit will operate normally
whilst recharging. Prolonged connection to the mains will not damage the unit.
Overall dimensions: 170mm x 180mm x 65mm (65mm across feet)
Weight: Portable unit 420g. Mains unit 300g
Range / Finish: 1 Metre (Approx) / ABS fine, textured
Inputs: Integral electret microphone. External microphone input socket